CS Paper Radar

Electric-Field Induction Motor with Discrete Circuit Elements and Improved Rotor Dynamics

Alex S. Miller, Jeffrey H. Lang

cs.RO eess.SYphysics.app-phphysics.ins-det ·submitted 2026-10-27 15:55 UTC · v1
unusual

Abstract

Electric-field-based actuators and machines lead the design space at the nanoscale and in biological systems, while having the potential to be used in favorable macroscale applications which prioritize minimal mass, performance in a vacuum, or performance in high temperatures. Electric-field induction motors consist of a set of stator electrodes which induce opposite charges onto a movable rotor surface. In earlier work, rotor surfaces for electric-field induction motors have been made of single continuum materials, which are limited in possible resistivity, permittivity and circuitry characteristics. To enhance design freedom, we develop a rotor for electric-field-based machines which may be constructed out of discrete circuit components between a finite number of conductive vanes. Magnetic-field induction motors, which are common in machinery, often utilize ``deep bar'' rotors, consisting of conducting bars which decrease the rotor time constant with increasing frequency using the skin depth effect. We propose, analyze, design and demonstrate a macro-scale electric-field induction motor which uses circuitry on the rotor surface to emulate the ``deep bar'' design, providing improved torque over a wide range of speeds.

Closest papers

Nearest neighbours by meaning across the whole index.

QDD-MM: A Simple and Compact Open-Source Muscle Module with Quasi-Direct-Drive Motor for Tendon-driven Robots

cs.RO ·2026-11-18 ·Kento Kawaharazuka, Yoshimoto Ribayashi, Takahiro Hattori, Shunnosuke Yoshimura, Kei Okada
publishedcode/data similarity 0.48
Abstract · Accepted to IEEE-RAS Humanoids 2026, website - https://haraduka.github.io/qddmm/, youtube - https://www.youtube.com/watch?v=09xRhZO497k

Tendon-driven robots, which actuate like biological muscles by using motors to wind wires, offer advantages such as variable stiffness and redundant actuation. Despite these advantages, musculoskeletal structures inherently involve a large number of diverse muscles, making it desirable to compactly modularize each muscle unit and flexibly accommodate diverse muscle arrangements. While various small muscle modules have been proposed to date, existing designs tend to be complex, difficult to maintain, and suffer from low backdrivability and limited actuation speed due to their high gear ratios. In this work, we propose QDD-MM, a muscle module that leverages recent advances in quasi-direct-drive motors to achieve a simpler and more compact structure with higher backdrivability and faster actuation than previous modules. By utilizing quasi-direct-drive motors, the module eliminates the need for dedicated force-sensing mechanisms, significantly simplifying the overall design, while also supporting flexible wire routing in multiple directions, various module-to-module connections, and even the use of the module body itself as a structural component. QDD-MM integrates these capabilities into a reusable muscle module, and its design is openly available at https://github.com/haraduka/qddmm. We developed tendon-driven robots with one joint and either two or three muscles, as well as a partial musculoskeletal humanoid, using the proposed QDD-MM and verified their effectiveness. We expect that this muscle module will democratize tendon-driven robotics and further accelerate progress in the field.

0.71

Improved Closed-Form Identification of the Air-Gap Permeance in Magnetic Equivalent Circuits of Rotor-Eccentric Electric Motors

eess.SY ·2026-11-13 ·Philip Desenfans
unusual similarity 0.46
Abstract · This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may…

Fast and accurate simulation of electric motors is essential for their design, fault diagnosis and control. Magnetic equivalent circuits (MECs) offer a computationally efficient alternative to the finite element method (FEM), yet their flux tube representation poorly captures the air-gap field. This creates a challenge, as the air gap stores most of the magnetic energy and governs the electromagnetic torque and, in rotor-eccentric motors, the unbalanced magnetic pull (UMP). Existing air-gap permeance expressions vary widely in their results for torque ripple and UMP and account for tooth-normal eccentricity only. This paper proposes the dual-term air-gap permeance (DTAP) model, a closed-form expression for the air-gap permeance between a stator and a rotor tooth that accounts for tooth-normal and tooth-tangential eccentricity, with and without rotor skew. Its parameters are identified from a FEM model of the air gap and the complete set of tooth heads, which includes the shielding by the neighbouring teeth. For three motors, DTAP reproduces the FEM air-gap permeance with a 2.8-4.8 times smaller error than the state of the art, at a comparable computational cost. Implemented in the MEC of an eccentric induction motor, it reproduces the torque ripple within 1.6% and the peak UMP within 1.3% of the reference, i.e., with 2.8 and 27 times smaller deviations than the state of the art. DTAP thereby enables MEC to predict the torque pulsations and bearing loads of eccentric motors more accurately without sacrificing computational speed.

0.26

Task-Oriented Co-Design and Optimization of Geared Actuators for Robotic Applications

cs.RO ·2026-09-19 ·Xuanyu Huang, Jianqiang Dong, Hang Zhao
hot direction similarity 0.42
Abstract

Different tasks performed by legged robots impose distinct torque and speed requirements on actuators. Existing robotic actuators are generally optimized at the component level for metrics such as torque or power density, without explicit task guidance. System-level optimization across components such as motors, gearboxes, and sensors is challenging because of the high computational cost and coupling among mechanical, electrical, and electromagnetic behaviors. Consequently, improvements in individual components may not translate into better robot performance in a specific task. To this end, we present a systematic optimization framework for task-oriented co-design of actuator hardware and control. First, surrogate models are employed to accelerate motor evaluation and support global exploration of the coupled design space. Then, a hierarchical mixed-variable optimization strategy is adopted, combining discrete enumeration with continuous search over dimensions and real-valued indices. These indices are rounded to select admissible values for the remaining discrete choices before each evaluation. Within this search, rated output torque density and task performance are jointly optimized, with Bezier-parameterized joint torque profiles determined for each hardware candidate. Finally, the effectiveness of the proposed framework is validated through actuator fabrication and experiments on a two-degree-of-freedom jumping leg. Based on its measured mass, the fabricated prototype achieves a nominal rated output torque density of 35.7 N m/kg, approximately 60% higher than that of a widely used commercial geared joint actuator, while being 18.6% lighter. Under matched bench conditions, it achieves 12.0% greater jump height at twice-rated torque. Together, these results demonstrate a systematic route from task requirements to actuator design and control.

0.36

Highly Scalable Selectorless Cryogenic Memory Array Using Ferroelectric Josephson Field-Effect Transistors

cs.ET ·2026-09-25 ·Saheeb Ahmad, Shamiul Alam
similarity 0.42
Abstract · 8 pages, 4 Figures, 1 Table

Scalable memory systems that satisfy the temperature, speed, and energy requirements of cryogenic environments are essential for the development of large-scale quantum computers. They may also benefit high-performance computing and space applications. However, existing cryogenic memory technologies often suffer from limited scalability, low operating speed, and/or high power consumption, restricting the scalability of target applications. Ferroelectric Josephson field-effect transistors (Fe-JoFETs), which combine ferroelectric polarization with the superconducting properties of Josephson junctions, offer a promising solution. The ferroelectric layer enables nonvolatile storage capability, while the Josephson junction supports high-speed, energy-efficient operations. In this work, we leverage Fe-JoFETs to develop a highly scalable, ultra-low-power, nonvolatile cryogenic memory array that does not need additional selector devices for random access. Moreover, the superconducting component of Fe-JoFET provides a binary decision during read, eliminating the need for sensing peripheral circuitry. We first develop a physics-based Verilog-A compact model for Fe-JoFETs and use it to verify the functionality of the proposed memory array. By eliminating both selector and sensing circuitry, the proposed memory architecture offers higher scalability than existing technologies. The ultra-low-power operation of this memory also makes it compatible with strict power budgets of cryogenic applications.

0.35

Magflow: Differentiable Simulation of Industrial-Grade 6D Magnetic Levitation

cs.RO cs.LGeess.SY ·2026-11-17 ·Philipp Hartmann, Jannick Stranghöner, Klaus Neumann
top venuecode/data similarity 0.42
Abstract · 8 pages, 5 figures, 1 table. Accepted for publication in IEEE Robotics and Automation Letters (RA-L). Project page: https://sites.google.com…

Magnetic levitation with six-degrees-of-freedom enables frictionless transport and micrometer-scale positioning in principle, but low-level control is inherently challenging due to its complex and unstable dynamics. Industrial systems typically rely on deep hardware-software co-design, where mover and stator geometries are jointly designed to enable a compact, hand-crafted approximation of the electromagnetic force computation, thereby keeping control computationally tractable at kilohertz rates. However, this approach imposes overly conservative constraints on the operating workspace and the range of supported mover topologies. Instead of reducing the underlying physics to a hand-crafted approximation, we compute the physics directly. We introduce Magflow, a fully differentiable, GPU-parallel simulator for 6D magnetic levitation. It is used to train the first neural controller for an industrial-grade 6D magnetic levitation system that is learned purely from simulated physics. We show that the learned neural controller transfers zero-shot from simulation to real hardware while satisfying hard real-time constraints at 4 kHz. The learned controller achieves qualitatively new behaviors and even levitates a mover topology for which no hand-crafted solution exists. These results demonstrate that co-design is not a physical necessity for 6D magnetic levitation control. More broadly, control learning from simulated physics can find solutions beyond the reach of control engineering in demanding industrial domains. Source code and demonstration videos are publicly available at https://sites.google.com/view/magflow.

0.58

Ultra-Low-Impedance Robotic Gripper for High-Bandwidth and Transparent Physical Interaction

cs.RO ·2026-08-10 ·Joon Lee, Ari Choi, Seokhwan Jeong
published similarity 0.41
Abstract · ICRA 2026 (Late Breaking Result Poster)

Conventional robotic grippers often use high-ratio transmissions to generate grasping torque and external force sensors to measure physical interaction. High-ratio transmissions increase friction, reflected inertia, and mechanical impedance, while external sensors add hardware complexity. To address these trade-offs, this study proposes a novel 9-DOF, three-fingered Differential Direct-Drive (DDD) gripper that combines DD motors with a low-ratio (1:2) differential transmission. The mechanism centralizes actuator mass at the base to minimize moving-link inertia, while the differential architecture couples two motors in parallel to amplify torque during flexion. Experiments show that the prototype delivers a nominal grasping force of approximately 18 N and a fingertip force of 4.7 N, while maintaining a low motor contribution to system inertia (0.236%) and low passive mechanical impedance, with a maximum measured value of 50.1 N/m when the motors are unpowered. The proposed hardware addresses the trade-offs among torque, physical transparency, and kinematic dexterity, providing a foundation for high-bandwidth interaction and sensorless proprioceptive force estimation.

0.19

Enabling Tidying Tasks in Robotic Vacuum Cleaners via a Geometry-Induced Self-Locking Deployable Linkage

cs.RO eess.SY ·2026-10-14 ·Eunseok Song, Jinwoong Kim, Sohee Lim, Taehyeong Kim, Yongkook Kim +3 more
similarity 0.40
Abstract · 8 pages, 6 figures, 1 table. v2: corrected author name, added minor revisions

Robotic vacuum cleaners must extend their functionality within tight limits on size, cost, and durability. Deployable linkages with few actuators meet these limits, but their backdrivability makes it difficult to hold a load-bearing posture without continuous motor torque. We introduce a two-stage deployable linkage that locks through its own geometry. At full deployment, an internal three-link subchain approaches a collinear, near-singular configuration in which the input-output transmission ratio tends to zero; plate loads therefore leave only a small residual back-driving torque, which drive-train friction and a lightweight magnetic detent absorb. A single actuator performs deployment and locking, a passive chassis-mounted trigger releases the lock for retraction, and a second actuator adjusts only the deployment height. We integrate the mechanism into a commercial robotic vacuum cleaner and validate it through a 100-cycle repeatability test, a quasi-static load test in which the locked plate held 50 N with the motor de-energized, and 140 pushing-type tidying trials on seven household objects against a commercial arm-equipped vacuum robot. We derive the analytical holding condition and discuss its limits as an intermediate design point between passive compliance and articulated manipulation.

0.24

Electrospun Fields: 3D Nano-Fiber Material Computation as Design Method

cs.GR cond-mat.softcs.RO ·2026-08-24 ·Wai Lok Wan, Ayah Mahmoud, Sergio Mutis, Avantika Velho, Annie Xing +1 more
publishedcode/dataunusual similarity 0.39
Abstract · 15 pages, 10 figures. Published in Proceedings of the ACM on Computer Graphics and Interactive Techniques (SIGGRAPH 2026). Open-source hardw…

We present a robotic electrospinning platform and design method for depositing nanofiber membranes onto non-planar, three-dimensional conductive geometries. Conventional electrospinning relies on fixed emitters and planar grounded collectors, which restricts deposition to flat substrates: on concave geometries, field shielding prevents fibers from reaching recessed regions, and material bridges across elevated features instead. We address this with a custom end-effector integrated with a six-axis UR20 arm. The tool carries a localized stepper-driven syringe pump that maintains consistent polymer flow independent of orientation, and routes high-voltage DC (up to 25 kV) directly to a robot-mounted needle, turning the arm into a mobile emitter with full kinematic control over position, orientation, working distance, and traversal velocity. Toolpaths that continuously reorient the emitter along surface normals give access to concave topologies unreachable by fixed-axis systems. We characterize the resulting deposition behavior in two parts. A catalog of four bio-compatible polymer systems (PEO, PVA, keratin-PEO, silk-PEO) establishes the operating envelope, reporting deposition speed, jet stability, fiber size, alignment, and durability for each. A taxonomy of 3D-printed conductive scaffolds spanning geometric primitives, hybrid compositions, and square, triangular, and hexagonal lattices links collector geometry to fiber alignment, density, and cross-void bridging. We also demonstrate programmable grounding, in which selectively energized pins in an array steer deposition without changing physical geometry. Assembly instructions and toolpath-generation code are released as an open-source repository.

0.49