CS Paper Radar

Air-Scan-Based Point-Spread-Function Estimation for Megavoltage CT with Flat-Panel Detectors

Seemeen Karimi, Joseph Bendahan, K. Aditya Mohan

eess.IV ·submitted 2026-11-02 16:09 UTC · v1
publishedunusual

Abstract

Accurate spatial-resolution characterization of flat-panel detectors at megavoltage energies is difficult due to long-tailed cross-talk. Conventional measurements at high energy using line-pair gauges or knife-edge phantoms require expensive, carefully fabricated objects and precise alignment, and despite these, scatter from the phantom, detector, and imaging room can further confound the measurement. We present a method for estimating the detector point spread function (PSF) from the mean noise power spectrum (NPS) calculated from repeated radiographs in air. The approach is mathematically equivalent to an autocovariance-based method but is more practical for long-tailed PSFs. We validate the method using simulated air data and Monte Carlo N-particle (MCNP6) calculations of energy deposition in a flat-panel detector. We show that deconvolving the experimental PSF increases the accuracy of transmission radiographs of step wedges. The method requires no phantom or alignments and is straightforward to reproduce.

Comment
This has been presented at a conference, proceedings are pending

Closest papers

Nearest neighbours by meaning across the whole index.

Unified Projection-Domain Material Decomposition for Energy-Integrating and Photon-Counting CT

eess.IV physics.med-ph ·2026-10-21 ·Dale Black, Surya Naidu, Hamidreza Khodajou-Chokami, Sabee Molloi
theory similarity 0.52
Abstract · 27 pages, 10 figures, 6 tables

Objective: To develop a unified and efficient method for projection-domain material decomposition in spectral computed tomography (CT) that incorporates an arbitrary number of spectral measurements, independent of the acquisition mechanism, without reducing the measurements to two effective energies. Approach: A nested optimization method was developed for two-material basis decomposition from K>=2 spectral measurements. It extends an existing two-measurement univariate method by replacing its polynomial approximation with profile minimization of the Poisson negative log-likelihood, reducing the inversion to two one-dimensional searches that use all measurements without spectral rebinning. The method was evaluated in simulation for energy-integrating (GE Revolution Apex Elite, Siemens SOMATOM Flash) and photon-counting (Siemens NAEOTOM Alpha) CT. Main results: The method recovered line integrals with noiseless iodine errors below 3e-6 g/cm^2 and noise within 3% of the Cramer-Rao lower bound (CRLB). Virtual monoenergetic images (VMIs) agreed, at 70 keV and above, with reference CT numbers and, on all three systems, with vendor VMIs of physical scans (mean absolute error 6-22 HU). For photon counting, four measurements instead of two reduced the iodine CRLB by 19% and image noise by 8-16% at every VMI energy, and lowered the regression error at 70 keV and above. Iteration and tolerance settings changed CT numbers by less than 0.04 HU, and decomposition took 0.34-0.67 s per million rays on an A100 GPU. Significance: The method provides fast, accurate decomposition for any spectral CT acquisition mechanism and number of measurements, so one method can serve every scanner in a virtual imaging trial.

0.25

Hexagonal Basis Projectors for Model-Based Iterative CT Reconstruction

cs.CV ·2026-10-17 ·Ke Chen, Alireza Entezari
similarity 0.52
Abstract

Image representation affects both the forward model and quantitative feature recovery in model-based iterative CT reconstruction. For isotropically bandlimited signals, the hexagonal lattice is the most sampling-efficient lattice in two dimensions, with greater directional isotropy and a larger alias-free bandwidth than the Cartesian grid at equal density. We develop constant and linear hexagonal projectors for two-dimensional fan-beam CT using box spline calculus. Both bases form a partition of unity on common coefficient centers; the linear tent also reproduces affine functions. We derive analytic ray footprints and effective detector-blur expressions and implement efficient GPU forward and backprojection. On simulated FORBILD data, the linear model improves on Cartesian and hexagonal pixels, with its best noisy-data accuracy at the coarser resolution. Real-world 2DeteCT comparisons use high-dose, high-resolution Cartesian reconstructions as pseudo ground truth and show competitive image and feature agreement. These results establish a practical hexagonal representation for quantitative CT.

0.22

SpectralCTGaussians: Projection-Domain Reconstruction and Basis Material Decomposition for Spectral CT using 3D Gaussian Splatting

cs.CV ·2026-08-29 ·Reinout Vos, Saptarshi Neil Sinha, Michael Weinmann
similarity 0.50
Abstract

Spectral computed tomography (CT) extends conventional CT by measuring attenuation across multiple energy channels, allowing improved modeling of physical X-ray interactions and energy-dependent material behavior and leading to richer scene understanding. We present a novel method for spectral CT reconstruction and basis material decomposition using 3D Gaussian Splatting by adding per-Gaussian basis material fractions to the set of learnable parameters, which together with a set of energy-dependent basis functions define the attenuation across the full spectral range. The basis functions represent various physical attenuation models such as photoelectric absorption and Compton scattering, and are jointly optimized across all energy channels through a differentiable polychromatic forward model, with material decomposition performed via mean-shift clustering of the resulting coefficients. We evaluate our method on a baseline real-world dataset as well as a synthetic dataset that we introduce, comparing against traditional reconstruction algorithms and state-of-the-art learning-based CT reconstruction methods. Our approach outperforms all traditional baselines in novel view synthesis and achieves the best PSNR among all compared methods for spectral CT volume reconstruction, while describing all energy channels with a single shared representation that requires a number of Gaussians comparable to single-channel Gaussian splatting-based CT reconstruction approaches. For basis material decomposition, no traditional or learning-based baseline offers one-step decomposition with direct RGB material segmentation, and our method additionally recovers the photoelectric basis with higher PSNR than traditional pipelines.

0.25

Model-Based Iterative Reconstruction with View-Dependent Detector Displacements for Cone-Beam CT

eess.IV ·2026-09-18 ·Doga Topcicek, Sharmin Majumder, Whitney A. Poling, Dmitriy D. Bruder, Zhili Feng +2 more
similarity 0.49
Abstract · 5 pages, 5 figures

Detector shifting is used in industrial cone-beam computed tomography to reduce ring artifacts, but the resulting detector motion can vary nonuniformly across projection views and produce detector positions that cannot be represented by fixed offsets. Although analytical reconstruction can accommodate this motion, approaches that use projection interpolation or rebinning may limit spatial resolution and introduce artifacts. MBIR provides an alternative by representing the acquisition geometry explicitly within the reconstruction model. Existing separable distance-driven MBIR formulations assume fixed detector geometry across projection views and therefore cannot directly represent nonuniform motion in both detector dimensions, as this motion changes the voxel-to-detector mapping. We extend the separable distance-driven MBIR model to incorporate recorded horizontal and vertical detector displacements into the distance-driven overlap computation while leaving measured projections unchanged. Forward-projection validation achieved an NRMSE of 0.0338 across 1080 views. The proposed model achieved a 3D SSIM of 0.9404 and NRMSE of 0.0406, compared with 0.5396 and 0.1740 for fixed-detector MBIR. A second industrial dataset showed reduced structured artifacts compared with FDK.

0.41

PSF-Informed Reconstruction: An Enhanced 2D Directional Filtered Backprojection Method for Cone-Beam Rotary Computed Laminography

cs.CV ·2026-10-31 ·Chengxiang Wang, Wei Yu, Baodong Liu
similarity 0.48
Abstract

Cone-beam rotary computed laminography (CL) presents a viable alternative to cone-beam CT for imaging objects with high aspect ratios. Conventional reconstruction techniques, such as CL-FBP and CL-FDK, often yield suboptimal results charac?terized by pronounced superimposition artifacts, reduced contrast,and blurred edges, primarily due to their reliance on 1D row-wise filtering along detector rows. To address these limitations and improve reconstruction quality, we proposed a novel 2D directional filtered backprojection (DFBP) method based on the point spread function (PSF). First, an exact expression for the projection process is derived by establishing the relationship between a reconstructed pixel and its corresponding projection point on the detector. Second, a revised backprojection process incorporating two weighting factors is introduced to counteract the nonlinearity inherent in conventional backprojection, leading to a simplified PSF formulation. Third, to circumvent the computational burden of 3D image space filtering,an approximate method by linearizing the coordinate relationship in Fourier space under some assumptions is developed that transfers the 3D filtering operation to the 2D projection space. This approach facilitates the derivation of a formally simple yet effective 2D direc?tional filter, which integrates a 2D von Hann window and a 2D sinc window. Experimental results demonstrate that the proposed method produces reconstructions with superior contrast, sharper boundaries,and fewer superimposition artifacts compared to CL-FBP and CL?FDK. Moreover, it enables more accurate recovery of internal structures, such as bubble defects and electronic components.

0.30

An Efficient Blind Detection of OFDM Signals with Unknown Parameters

eess.SP ·2026-10-16 ·Ata Bartu Soyuer, Gokhan M. Guvensen
similarity 0.46
Abstract · Submitted to IEEE Transactions on Aerospace and Electronic Systems (TAES) for possible publication

This study investigates efficient detector designs for the blind detection of orthogonal frequency-division multiplexing (OFDM) signals with unknown power, bandwidth, and carrier frequency in wideband spectrum sensing. We first describe the received signal model and conduct an asymptotic covariance analysis to obtain a tractable discrete-time representation. Based on this model, generalized likelihood ratio test (GLRT) detectors are derived for both known and unknown noise power cases in a single-antenna receiver setting. The proposed framework is subsequently extended to multi-antenna receivers, and the corresponding multi-antenna GLRT detectors are developed for both known and unknown noise power cases. Importantly, using the cumulative-sum (CUSUM) operations, the resulting detectors reduce to an efficient one-dimensional (1D) search in both single-antenna and multi-antenna settings. We also provide theoretical analysis for the conventional energy detector (Conv-ED) and the hypothetical uniformly most powerful (UMP) test to reveal the impact of system parameters on detection performance. In addition, computational complexity analysis is presented for both the proposed and conventional detectors. Finally, comprehensive simulation results are provided to evaluate the probability of detection. The results demonstrate that the proposed detectors achieve performance close to that of a genie-aided detector while significantly outperforming conventional detection approaches.

0.24

Spatial phase coherence and its applications to masking and adaptive neighborhood sizing in multitemporal InSAR

eess.SP ·2026-11-15 ·Magnus Heimpel, Irena Hajnsek, Othmar Frey
similarity 0.46
Abstract · 44 pages, 12 figures

We examine spatial phase coherence (SPC), a measure of the correlation between the wrapped phase time series of two pixels in a stack of single-look synthetic aperture radar acquisitions. A pixel and its adjacent neighbors share speckle through the point spread function, so that decorrelation alone does not lower their SPC below a floor. We find that masking pixels whose mean SPC to their eight neighbors is well below that floor, as in parts of layover and shadow areas, is an inexpensive complement to geometry-derived layover and shadow masks. For distributed scatterer pixels, averaging SPC over a fixed set of neighbors that share no speckle yields a proxy for the local coherence, the phase coherence indicator (PCI), that is available before the selection of statistically homogeneous pixels (SHPs). In phase estimation, averaging more pixels reduces noise but may also increase the bias in heterogeneous areas. To relax this trade-off, we propose to enhance SHP selection algorithms by scaling the search window size according to the PCI and truncating the set of selected pixels where a smaller nested set agrees clearly better with the phases at the center. In simulations of a TerraSAR-X and a Sentinel-1 stack with 44 and 79 acquisitions, we apply this adaptive neighborhood sizing (ANS) to established amplitude- and covariance-based SHP selection algorithms with thresholds that adapt to the PCI. Without ANS, the largest tested search window size has 13 to 29 % more phase linking error than the best of the tested sizes. With ANS, the largest window has the lowest error of the tested sizes, 11 % lower than that of the same selection at its best tested size without ANS. On a real TerraSAR-X stack, the mask based on SPC flags pixels in building shadows that a terrain model misses. On real Sentinel-1 stacks, ANS preserves dense fringes on a slowly deforming slope and in part on a fast landslide.

0.34

TRACE: Two-Stage Detector-Response Estimation With Angular Cosine Expansion for Ring Artifact Correction in Photon-Counting CT

cs.CV ·2026-09-14 ·Jigang Duan, Heran Wang, Ligen Shi, Zheng Sun, Ping Yang +1 more
similarity 0.45
Abstract

Detector response nonuniformity introduces systematic projection errors and ring artifacts in photon-counting detector computed tomography (PCD-CT). In measured PCD-CT data, residual stripe amplitudes vary slowly with projection angle, which fixed-bias models cannot adequately capture. We propose TRACE, a two-stage unsupervised sinogram decomposition method for estimating and correcting these response-related errors. TRACE represents stripes as a fixed bias plus low-order discrete cosine transform (DCT) components, using a small number of coefficients to describe angular variations at each detector element. A learnable analysis--synthesis architecture represents the ideal projections, while two-stage optimization separates them from fixed and then dynamic stripes. An angular-gradient soft orthogonality constraint suppresses correlated variations within the shared DCT gradient subspace, reducing the leakage of object structures into the artifact estimate. All parameters are optimized directly on the measured sinogram without paired training data. Experiments on measured QRM mouse phantom and porcine trotter data show that TRACE suppresses ring artifacts and improves image uniformity while preserving edge sharpness, soft-tissue texture, and trabecular detail.

0.34