CS Paper Radar

Millimeter-Wave Gaussian-to-Flat-Top Beam Shaping Using a Single-Curvature Lens: A Novel Approach

Ehsan Imanbeygi, Mohammad Hossein Koohi Ghamsari, Mehdi Ahmadi-Boroujeni

eess.SY physics.optics ·submitted 2026-11-04 06:58 UTC · v1
published

Abstract

This paper presents a novel method for converting the divergent Gaussian intensity distribution of a millimeter-wave source into a uniform (flat-top) distribution using a single curved surface. The proposed method combines the surface profile of a collimator with that of a beam shaper. To validate the method, the profile of a single-sided (plano-convex) lens is derived and placed 52 mm in front of a conical horn antenna operating at 100 GHz. The lens transforms the Gaussian radiation of the horn, with an incident beam radius of 11.9 mm, into a uniform beam with a radius of 400 mm at a distance of 3 m. The lens surface profile is optimized using a full-wave-simulation-based procedure, and the resulting output beam is compared with that of a previously designed double-sided (concave-convex) lens. Simulation results show that, within the desired field of view, the optimized single-sided lens produces a flat-top intensity distribution with satisfactory ripple and roll-off. Finally, the sensitivity of the optimized lens to frequency variation is investigated. The proposed lens is suitable for generating uniform illumination in active stand-off millimeter-wave imaging systems.

DOI
10.22034/tjee.2026.69505.5094

Closest papers

Nearest neighbours by meaning across the whole index.

Single-sided lens terahertz flat-top beam shaping in the Fresnel region

eess.SY physics.optics ·2026-11-04 ·Ehsan Imanbeygi, Mohammad Hossein Koohi Ghamsari, Mehdi Ahmadi-Boroujeni, Babak Honarbakhsh
published similarity 0.70
Abstract

In this paper, a novel, to our knowledge, analytical approach is introduced for the design of a single-sided plano-convex lens (PCL) capable of terahertz (THz) flat-top beam shaping in the Fresnel region. The lens profile, derived from geometrical optics principles, integrates collimating and beam-shaping functions into a single optical surface, thereby simplifying fabrication. The efficiency of the method is demonstrated by designing two PCLs that convert a divergent Gaussian beam from a monochromatic THz source (at 100 and 200 GHz) into flat-top beams with target radii of 400 and 500 mm at distances of 3 and 4 m, respectively. The resulting fields, evaluated through analytical, integral equation, and finite element techniques, are shown to be comparable to those produced by a conventional double-sided concave-convex lens. Furthermore, the sensitivity of the design to frequency and alignment variations is investigated, confirming the robustness of this single-curvature approach for integration into practical THz imaging systems.

0.67

Broadcasting in Centimeter-Wave Gigantic MIMO Systems: Beam Shaping is All You Need

cs.IT ·2026-10-21 ·Boyu Ning, Yike Xie, Jaebum Park, Songjie Yang, Weidong Mei +2 more
top venue similarity 0.53
Abstract

Beamforming is a key enabling technology for centimeter-wave Gigantic MIMO (G-MIMO) systems, using antenna arrays to generate wide beams for cell-wide broadcasting or narrow beams for data transmission. This paper presents a novel \emph{beam shaping technology} for designing environment-aware broadcast beams (i.e., beams for common control information delivery, as in 5G SSB). As a case study, we shape a \emph{prostrate beam} in the vertical plane to approximate uniform electromagnetic power distribution across the ground, thereby enhancing broadcast coverage quality. We first propose a geometric broadcasting model that, through coordinate transformation, relates base station height, beam spread, maximum service distance, and downtilt angle. Building on this model and the signal propagation model, we formulate the beam shaping problem as a non-convex optimization problem that aims to maximize ground-level coverage. To solve it, we develop a generalized optimization framework. We reformulate the problem into a matrix representation, equivalently transforming it into a target pursuit optimization (TPO) problem. Using variable substitution, the objective is convexified into a quadratically constrained quadratic program, and the non-convex rank constraint is handled via successive convex approximation, decomposing the problem into iteratively solved subproblems. We provide complexity and convergence analyses for the proposed algorithm. Numerical simulations confirm that the optimization effectively shapes the intended beam pattern and that the proposed prostrate beam yields significant performance gains, including substantially extended coverage distance, over conventional wide-beam benchmarks.

0.59

Characterization of Beam-Squint and Beam-Split Effects in RIS-assisted Multi-Frequency Networks

eess.SP ·2026-09-07 ·Mohammad Amin Saeidi, Hina Tabassum
top venue similarity 0.51
Abstract · This paper has been accepted for publication in IEEE journals

Multi-frequency operation in beyond-5G and 6G systems renders the beam directions of large-aperture arrays frequency-dependent, giving rise to beam misalignment effects critical for reconfigurable intelligent surfaces (RISs). When an RIS phase profile is configured at one frequency but illuminated at another, the reflected field may exhibit main-lobe deviation and additional dominant lobes, degrading beamforming performance. In this paper, we develop a unified analytical framework to characterize these effects for uniform planar array-based RISs under both continuous and finite-resolution phase control. We formalize beam-squint as the deviation of the maximum-gain beam from the desired elevation-azimuth angle pair and beam-split as the emergence of additional maximum-gain beams under frequency mismatch and quantization. For continuous-phase RISs, we derive necessary and sufficient peak conditions, obtain closed-form elevation-azimuth peak families, and establish feasibility conditions as functions of the frequency ratio, incidence and configuration angles, and element spacing. Extending the analysis to b-bit phase quantization, we express the quantized beampattern as a superposition of harmonic array responses via Fourier expansion of the quantization-error phasor, leading to closed-form per-harmonic peak families, dominance ordering, and feasibility conditions. To capture peak displacement induced by harmonic superposition, we further develop a perturbation-based correction leveraging dominant-harmonic curvature and residual-harmonic gradients, improving peak-location accuracy without exhaustive two-dimensional searches. Numerical simulations validate the analysis, quantify peak deviations and beam-split probabilities, and demonstrate sum-rate gains by including analytically predicted squinted/split and harmonic candidates in multi-RIS, multi-user, multi-band networks.

0.44

LUNA: Luneburg-Lens-Aided Reconfigurable Array for 6G-and-Advanced Wireless Networks

eess.SP cs.IT ·2026-09-22 ·Ziwei Wan, Zhen Gao, Shuping Dang, Michail Matthaiou, Zhaocheng Wang +1 more
similarity 0.51
Abstract · 7 pages, 5 figures, 1 table, submitted to IEEE journal for possible publication

This article introduces the LUneburg-lens-aided recoNfigurable Array (LUNA), an antenna architecture that unifies multiple-input multiple-output (MIMO) and network-controlled repeater (NCR) functionalities in the Luneburg lens-enabled hardware platform. A Luneburg lens, fabricated from graded-index dielectric materials, passively converts the radiation of a low-gain feed into a highly directional beam without active phase shifting, while a dense passive feed bank and a reconfigurable feed-selection network electronically switch the beam directions with minimal hardware complexity and power consumption. We commence by reviewing the basic principles and application history of Luneburg lenses in radar and wireless communications, which motivates their role in 6G-and-advanced networks. Then, we highlight how a Luneburg lens and a reconfigurable feed array construct both LUNA-MIMO and LUNA-NCR, where the lens and feed bank can be reused across functions and frequency bands. Case studies demonstrate that LUNA achieves the satisfactory spectral and energy efficiency with a few radio-frequency chains, and it also improves positioning performance for sensing tasks. Finally, some open problems and research directions are provided to inspire follow-up research on LUNA.

0.28

Wavefront Engineering for Physical Layer Security in Near-Field Wireless Communications

eess.SP ·2026-10-15 ·Sotiris Droulias, Angeliki Alexiou
similarity 0.50
Abstract · 12 pages, 9 figures

With wireless transmission exposing information to potential interception by unintended receivers, physical layer security (PLS) offers a promising approach to securing wireless communications. Beamforming can mitigate this vulnerability by exploiting the spatial characteristics of wireless propagation to concentrate power toward the intended receiver while suppressing it at potential eavesdroppers. However, as wireless systems enter the radiating near field of large-aperture antenna arrays, the resulting wavefront curvature provides additional opportunities for spatial wavefront engineering to enhance PLS. In this work, we investigate the use of different beam types for PLS, including focused, curved, abruptly autofocusing, and cosine beams, generated using uniform linear and planar arrays (ULAs/UPAs). To quantify their performance, we introduce power-based metrics that characterize the power received by the legitimate user and a potential eavesdropper. For all beam types we introduce focusing along the vertical UPA direction, to independently control the phase distributions along the two UPA dimensions and enhance the power discrimination between the legitimate receiver and the eavesdropper. We also propose hollow-focused beams, in which an inactive strip is introduced in the transmitting aperture to create a protected low-power region between the transmitter and the legitimate receiver. The results demonstrate that vertical focusing dramatically enhances the PLS performance and that hollow-focused beams achieve superior PLS performance in both line-of-sight (LoS) and vicinity-of-user (VoU) scenarios.

0.27

Degrees of Freedom Sampling

eess.SP ·2026-09-23 ·Jiawang Li, Mats Gustafsson
similarity 0.49
Abstract

A geometry-based framework for sampling electromagnetic fields over surfaces is presented. The approach extends the shadow-area formulation of electromagnetic degrees of freedom (DoF) from a global mode count to a spatially resolved DoF density that determines the sampling distribution. The observation surface is partitioned into cells containing approximately one DoF, with the cell area determined by the DoF density and the cell shape determined by the projection of the DoF density vector onto the observation surface. In the far field, the source shadow area defines a directional DoF density over the observation sphere, while in the near field, the mutual-shadow density and a DoF density direction determine the local sampling geometry. The resulting method requires only the source-observation geometry and does not require an explicit singular-value decomposition of the propagation operator. Numerical results for several source and observation geometries demonstrate reconstruction performance close to that of operator-based sampling methods. A beamforming interpretation further shows that the sampling cells correspond to geometry-dependent beam regions, establishing a unified connection between DoF, sampling, and beamforming.

0.22

Bringing Environmental Enhancement Back to Its Physical Essence via Specular Reflecting Surfaces

cs.IT ·2026-08-15 ·Qingxiao Huang, Qianyao Ren, Yiqin Deng, Jun Huang, Yang Kun +1 more
similarity 0.49
Abstract

Intelligent control of wireless propagation environments is crucial for future network capacity and reliability. Unlike circuit-controlled reconfigurable intelligent surfaces (RIS), mechanically actuated specular reflecting surfaces (SRS) offer a simpler and potentially more cost-effective alternative. In this paper, based on the tractable ray-based cascaded channel model with power-projection correction, we investigate the fundamental operational behaviors of an ideal SRS in free space. Specifically, in the angle-aligned near field, edge reflections cause non-constructive combining, resulting in a damped oscillatory convergence of the gain to an aperture-independent constant. We further obtain the far-field behavior, unbounded-aperture asymptotics, an optimal aperture size and reflection angle, and a gain-based near/far-field boundary. For misalignment, we provide accurate approximations for small and large apertures via center-point and stationary-point analyses. We also define the SRS beam pattern, derive analytical 3-dB beamwidths, and quantify the effective region where a main lobe exists. Finally, we derive a closed-form achievable-rate for an SRS-aided communication system. Numerical results validate the proposed expressions, reveal distinct near-/far-field behaviors of specular reflection, and show that SRS can outperform RIS in the far field due to continuous aperture and angular-resolution control and stronger power projection.

0.04

Beyond Fresnel Approximation: Exact Airy Beamforming for Near-Field THz Communications

eess.SP ·2026-10-28 ·Fangjie Shen, Weidong Mei, Aoran Liu, Peilan Wang, Zhi Chen
similarity 0.48
Abstract

Line-of-sight (LoS) blockage can severely degrade the performance of conventional focused beams in terahertz (THz) communications. Recently, bending beams (e.g., Airy beams) have attracted increasing attention due to their ability to bypass obstacles by propagating along curved trajectories under near-field propagation conditions. However, existing Airy-beam designs in wireless communications often rely on the Fresnel approximation for the focal distance, which becomes inaccurate at large steering angles or short propagation distances. To address this limitation, this letter proposes a more accurate Airy beamforming design method based on the exact focal-distance expression and the corresponding caustic geometry. Specifically, we jointly optimize the bending curvature, virtual focal distance, and steering angle to maximize the received signal power subject to receiver-alignment and obstacle-avoidance constraints. To tackle the resulting non-convex problem, we first use geometric preprocessing to narrow the feasible range of the bending curvature. Then, a two-layer optimization framework is developed with the outer and inner layers optimizing the bending curvature and the other two parameters, respectively. Numerical results based on the cascaded geometrical and wave channel model demonstrate that the proposed method achieves higher received signal power than conventional Airy-beam designs and offers complementary advantages over conventional focused beams under different blockage ratios.

0.29