CS Paper Radar

Conceptual full-vehicle modeling of a modular all-wheel-drive robotic ADS test platform as a foundation for a digital twin architecture

Felix Florian Schwald, Martin Meiners, Michael Viehof, Erik Hultman, Edwin Kamau

cs.RO ·submitted 2026-11-18 15:51 UTC · v1

Abstract

This paper presents the development of an initial full-vehicle simulation model of the PixKit modular electric test platform in IPG CarMaker. The objective is to create a physics-based and extendable model structure that can serve as a low-level foundation for future digital twin applications. The reference vehicle is a skateboard chassis combining unconventional vehicle characteristics such as four independent wheel-hub motors and rear axle steering capable of high steering angles. Since complete measurement data of the vehicle is not yet available, the model parameterization is based on a combination of manufacturer documentation, derived values and engineering assumptions. The modeling approach focuses on the system-level integration of the main vehicle subsystems rather than on a fully validated representation. The resulting model was assessed through basic driving scenarios with different steering inputs and configurations. The simulations showed stable model behavior and physically plausible interaction between the subsystems. The all-wheel-drive configuration produced symmetric wheel responses in longitudinal driving, while counter-phase rear axle steering increased the yaw response and reduced the simulated turning circle diameter compared with front axle steering only. The circular driving scenario further indicated bounded roll and slip behavior. Overall, the implemented CarMaker model provides a traceable and functional simulation basis for the PixKit vehicle. It can support future model refinement, calibration with real vehicle data and development with the goal of creating a validated digital twin architecture.

Comment
9 pages, 10 figures. Supplementary project files are available at https://git-ce.rwth-aachen.de/asil-lab-cologne/03_publications/02_pixkitcmdigtwin

Closest papers

Nearest neighbours by meaning across the whole index.

Integrated Design and Reproducible Feasibility Analysis of a Four-Wheel Rover with Packet-Commanded Imaging, LiDAR Ranging, and Learning-Assisted Target Recognition

cs.RO ·2026-10-27 ·Sabik Bin Sultan, Shafi Bin Sultan, Safwan Sadad, Aranya Abeer Khan Prapya, Maria Sultan
benchmark similarity 0.55
Abstract · Research Manuscript for NASA HERC 2027

This study develops an integrated, reproducible design assessment for a four-wheel educational rover intended for the high-school remote-control division of the 2027 NASA Human Exploration Rover Challenge. The architecture combines commercial differential drive control, independently sprung wheel carriers, separate drive and task batteries, and a Raspberry Pi-based subsystem that executes received imaging and ranging commands. The analysis reconciles component lists with dimensioned computer-aided design views, derives mobility and electrical constraints, and connects sensor geometry to command execution. At the estimated mass of 10.919 kg, a 215 mm wheel rotating at 200 RPM produces a theoretical rolling speed of 8.105 km/h; consequently, the nominal motor label does not establish compliance with an 8 km/h design ceiling. A steady 20-degree climb requires at least 1.255 newton-meters per wheel under an assumed rolling-resistance coefficient of 0.10 and equal torque sharing. At 50 ft, an ideal 12-inch feature spans approximately 71 pixels across a full-resolution Camera Module 3 Standard image, while a 1-degree pointing error displaces the ranging ray by approximately 266 mm. An executed synthetic benchmark compares color-geometry rules and two linear support-vector classifiers on 2,400 generated board crops with scene-disjoint evaluation. A separate reference command executor is checked using mocked hardware. These software results and analytical sensitivities support a testable development plan; the study does not report physical rover trials. The principal contribution is a traceable connection between component choices, failure mechanisms, quantitative design limits, and reproducible verification tasks.

0.18

High-Fidelity Multi-Body Simulator for Autonomous Racing

cs.RO eess.SY ·2026-09-11 ·Nicola Musiu, Francesco Iacovacci, Fausto Lupo, Matteo Pini, Giovanni Scapicchi +9 more
similarity 0.53
Abstract

We present a custom high-fidelity vehicle dynamics simulation environment for testing and validation of Autonomous Racing software. The digital twin of the autonomous vehicle is developed in Dymola, using racecar dynamics modeling libraries to build a complete multi-body model. A 3D road surface, including elevation profiles and curbs, is implemented using the Curved Regular Grid (CRG) standard. The model is exported from Dymola as a Functional Mock-up Unit (FMU) and integrated into a custom software-in-the-loop simulator, where communication interfaces with the autonomous racing stack were developed in C++. A calibration procedure based on experimental data is also presented, along with a validation study to further support the quality of the proposed framework. The simulator runs in real time on a portable computer and provides reliable ground truth for algorithms validation prior to real-world deployment.

0.20

A Low-Cost, Open Platform for End-to-End Autonomous Driving on a Miniature Ackermann Vehicle

cs.LG cs.AIcs.RO ·2026-09-03 ·Gustavo Claudio Karl Couto, Eric Aislan Antonelo, Gabriel George Zipperer
similarity 0.52
Abstract

This paper presents a low-cost, open experimental platform for research in end-to-end autonomous driving with miniature Ackermann vehicles. The platform combines a physical vehicle, a printed urban track, data collection tools, trajectory registration, and a Webots digital twin, enabling controlled experiments that connect simulation-based autonomous-driving methods to real-world execution. As a first baseline, we implement command-conditioned behavior cloning, in which a neural policy receives an on-board camera image and a high-level navigation command and outputs steering and speed. The system is evaluated both on the physical vehicle and in simulation. In real closed-loop experiments, the learned policy follows lanes and executes commanded turns, reaching a mean cross-track error of 6.1 cm with respect to the reference route, close to the 4.7 cm observed in human demonstrations. In the digital twin, camera field of view has a strong effect on performance, reducing the mean cross-track error from 35.6 to 3.3 cm when widened from 58 to 120 degrees. Using the digital twin to generate synthetic driving data and a learned sim-to-real image translator to reduce the appearance gap, we further show that a higher-capacity policy trained on this synthetic data combined with real demonstrations is the only configuration that completes all four track routes in closed loop, whereas the compact baseline and the same network trained on real data alone complete fewer. These results establish the open platform as a practical testbed for sim-to-real studies and provide an initial command-conditioned imitation-learning baseline; we release it to support reproducible research.

0.30

InterSim: Innovative Intersection Digital Twins for Human-in-the-Loop Driving Simulation

cs.CE cs.CYcs.ET ·2026-11-04 ·Luyang Jiang, Chuheng Wei, Yaguang Li, Shaoqi Wang, Yupeng Zhou +4 more
code/data similarity 0.51
Abstract

Innovative intersection designs can improve roadway safety and operational efficiency, but their uncommon geometries may create challenges for driver comprehension during early deployment. Evaluating these designs through full-scale field implementation can also be costly. This paper presents InterSim, a Unity game engine-based human-in-the-loop (HITL) driving simulator that constructs digital twins of site-specific innovative intersections in a virtual environment. InterSim links the real world and the simulation world through two closed cycles: a digital twin cycle that builds each intersection twin from agency design and traffic data and returns evidence from simulation to the agency, and an HITL cycle in which human drivers or automated driving algorithms operate the ego vehicle under identical scenario conditions. The research capabilities of InterSim are demonstrated through two case studies: a surrogate safety study compares post-encroachment time distributions between a Reduced Conflict Intersection and a standard intersection under different traffic volumes; an eco-driving study compares human drivers with a rule-based agent using vehicle-to-infrastructure information and reveals differences in emission and driving behavior. These studies demonstrate that InterSim provides a reusable digital twin platform for investigating innovative intersection designs from diverse perspectives. Demo video and open-source code can be accessed at https://purduedigitaltwin.github.io/InterSim/

0.27

EViDS: An Environment--Vehicle Dynamics Integrated Simulation Platform for Intelligent Chassis Development

cs.RO ·2026-11-13 ·Lu Xiong, Yiming Zhou, Xuge Hu, Yi Zhang, Haoran Lv +1 more
similarity 0.51
Abstract

The development of intelligent chassis increasingly requires the integration of environmental and perception information with high-fidelity vehicle dynamics to support environment-aware intelligent chassis control. However, existing autonomous-driving simulators and professional vehicle-dynamics tools are generally developed for different purposes, making it difficult to integrate environmental information, vehicle dynamics, and chassis algorithms. This paper proposes EViDS, an Environment-Vehicle Dynamics Integrated Simulation Platform for Intelligent Chassis Development. EViDS integrates CARLA-based environment and sensor simulation with CarSim-based high-fidelity vehicle dynamics. Reference-pose-based state alignment and multi-rate interaction maintain spatial and temporal consistency, while ray-casting-based tire-road interaction transfers environmental information to the vehicle-dynamics model. Scenario configuration, synchronized data acquisition, and algorithm interfaces further support intelligent chassis development. The platform is evaluated through environment-dynamics interaction tests with vehicle-dynamics consistency comparisons, together with intelligent chassis applications. Results show that EViDS preserves vehicle-dynamics characteristics, reliably transfers environmental information, and supports online closed-loop intelligent chassis control, providing a unified simulation basis for environment-aware intelligent chassis development and validation.

0.22

GOLEM: Modular Humanoid Autonomy Towards Electric Vehicle Battery Disassembly

cs.RO ·2026-08-21 ·Max Conway, William Xie, Allen Devaraj, Yutong Zhang, Niraj Pudasaini +12 more
code/data similarity 0.51
Abstract

Disassembling end-of-life electric vehicle (EV) battery packs is dull and dangerous work, performed almost entirely by humans. We present GOLEM (Generalized Open Library of Embodied Modules), an end-to-end, open-source system architecture for EV battery disassembly with the Unitree H1-2 humanoid robot in which walking, manipulation, dynamic stability, navigation, and spatial memory are independent modules with abstract interfaces, so that methods are easily developed, interchanged, and compared. GOLEM is deployed as a Docker-based ROS 2 abstraction in which MuJoCo and IsaacLab digital twins expose interfaces matching the physical robot. GOLEM's composability and per-module customization enable development and demonstration of humanoid EV battery disassembly, from simulation to reality. GOLEM provides fair comparison between humanoid modules, enabling evaluation as a capability ladder, in which one module is characterized at a time and added as a rung: LiDAR-inertial navigation places the robot within 13.0cm of a 6m goal; a learned standing controller recovers from external disturbances that sampling-based lower-body MPC does not; and grasping loosened fasteners from a real Hyundai Ioniq 5 pack degrades from 97% tethered to 87% free-standing to 37% under navigation-induced pose variance. Source code is available at the project page https://golem-humanoid.github.io

0.39

An Exemplar of a Digital Twin in Mechanical Engineering: Understanding Model Hybridization

cs.SE ·2026-09-15 ·Mahussi Datongnon, Hubert Lejeune, Yoann Jus, Benoit Combemale, Julien Deantoni
top venue similarity 0.51
Abstract

Digital Twins (DTs) are widely adopted across a variety of application domains. In industrial sectors, particularly in mechanical engineering, they accelerate product development, reduce risks, enable early issue prediction, and lower sustainment costs . In practice, DTs increasingly integrate physics-based (deductive) and data-driven (inductive) models into hybrid models combining the complementary strengths of both modeling paradigms. In this paper, we refer to this integration paradigm as hybridization. Despite this trend, the engineering of hybrid DTs that is, remains insufficiently documented. Hybridization is often introduced in an ad hoc manner, and its implementation is only partially made explicit, which limits reproducibility and transferability. This paper reports on the development of an existing fluidic loop digital twin at Centre Technique des Industries M{é}canique (CETIM). The DT is described using the characterization framework of Gil et al., providing a structured view across its lifecycle dimensions. To make hybridization explicit, the case is further analyzed through a complementary characterization structured along two dimensions: motivation and realization. The resulting description provides a traceable account of hybridization decisions and supports the documentation and transfer of hybrid DT engineering practices.

0.46

System Identification of Admittance Models for Large Real-World Objects

cs.RO ·2026-08-30 ·Nathan I. Baum, Nathaniel G. Luttmer, Mark A. Minor
similarity 0.49
Abstract · 8 pages, 7 figures,1 table

Simulation of admittance-type models requires physically consistent dynamic models that are rarely available for off-the-shelf, everyday objects, limiting the fidelity of haptic interfaces that rely on such simulations. This paper presents the first complete workflow for producing physically consistent models of large real-world objects with various constraints and mechanisms, guaranteeing physical consistency of inertia and friction parameters. The workflow separates each object and identifies the handle and body in two stages, requiring no torque sensors at hinges, axles, or other constrained joints. Models are produced for a heavy, closer-actuated door and a wheelbarrow, representing objects of differing constraint types and model complexity. The door is modeled using four-bar linkage kinematics and a fluid dynamics-based lumped parameter model including opening, backcheck, swing, and latch zones. The wheelbarrow is modeled as a rigid body with a spherical wheel and no slip during rolling. Handle estimation RMS errors were below 0.64 N and 0.042 Nm across both objects. Door body estimation had RMS error of 2.19 Nm and wheelbarrow body estimation had RMS error of 6.77 Nm.

0.29