CS Paper Radar

Evaluating Wi-Fi HaLow for Next-Generation Capsule Endoscopy

Ziyao Zhou, Chen Shen, Tiancheng Cao, Hen-Wei Huang

eess.SY ·submitted 2026-10-25 09:37 UTC · v1

Abstract

Capsule endoscopy is limited by its wireless link: insufficient throughput restricts image resolution and frame rate, whereas high-rate radios typically use higher carrier frequencies that experience greater attenuation through tissue. This work evaluates Wi-Fi HaLow (IEEE 802.11ah), a sub-GHz Wi-Fi standard, as an image link for capsule endoscopy. Across all tested combinations of modulation and coding scheme and bandwidth, the saturation TCP throughput reached 15.55 Mbps, and the fastest configuration also achieved the lowest energy per bit. Through power optimization strategies, the combined power consumption of the HaLow module and microcontroller at 1 frame per second (FPS) was reduced from 101.70 to 14.00 mW, which is comparable to that of Bluetooth Low Energy systems. In a simulated in vivo setting, the default rate control selected the highest tested MCS and bandwidth, indicating sufficient link quality; this configuration also had the lowest measured power in both the 1 FPS mode (13.59 mW) and the 30 FPS mode (174.21 mW). The capsule-to-receiver latency was 20.68 ms for a 24 KB frame, while the receiver-to-capsule latency was 4.77 ms for a command; this low-latency bidirectional communication supports real-time detection and manipulation for next-generation capsule endoscopy.

Closest papers

Nearest neighbours by meaning across the whole index.

A Miniaturized Wi-Fi HaLow-Based Wireless Imaging Transfer System for Capsule Endoscopy

eess.IV ·2026-10-09 ·Michele Bertozzi, Lorenzo Amelio, Sebastiano Strangio, Nikita J. Greenidge, Benjamin Calmé +3 more
similarity 0.83
Abstract

Wireless capsule endoscopy is constrained by severe limitations in size, available power, and reliable data transmission through biological tissues. Although recent advances in miniature imaging sensors have improved image quality, the wireless transmission of color images at practical frame rates remains a challenging task under the tight capsule constraints. We present the design and the experimental validation of a miniaturized Wireless Imaging Transfer (WIT) system for capsule endoscopy based on a sub-GHz IEEE 802.11ah (Wi-Fi HaLow) wireless link. In addition, a preliminary in-vivo validation of Wi-Fi HaLow communication is reported, showing that a stable through-body wireless link can be established across biological tissues in a clinically relevant porcine model. These in-vivo results provide direct experimental support for the adoption of sub-GHz Wi-Fi HaLow for capsule endoscopy applications. Experimental results demonstrate stable wireless image transmission at a resolution of 320x320 pixels, with measured end-to-end data rates above 12 Mbps and a transmission energy efficiency of 20.7 nJ/bit. We also report a detailed power consumption analysis, with a breakdown of the contributions from the imaging sensor, illumination, digital processing, and RF transmission. When all active subsystem contributions are considered, including the camera, digital processing, RF transmission, and illumination at 60% LED brightness, the total power consumption is approximately 477 mW, corresponding to a complete-chain energy consumption of approximately 39.6 nJ/bit. Overall, the measured performance confirms that sub-GHz Wi-Fi HaLow provides a promising trade-off among throughput, robustness, and energy efficiency for wireless imaging in capsule endoscopy.

0.22

Python-based RTL Generator Demonstrated on a Low-IF 2-FSK Wireless Communication System

eess.SY ·2026-08-17 ·Brandon P. Hippe, David C. Burnett
similarity 0.51
Abstract

Hardware optimization is critical in the design of efficient wireless communication systems. Wireless communication hardware often consumes a significant fraction of the total system's power budget, with much of this power used in circuits that reduce various types of noise, particularly in the analog front end. The Single-Chip Micro Mote, or SCuM, uses a crystal-free radio architecture and makes design trade-offs that favor power consumption over noise performance while maintaining standards compatibility with popular Internet-of-Things (IoT) protocols such as IEEE 802.15.4 and Bluetooth Low Energy. In the continued development of SCuM, we recognize that the digital baseband hardware developed can be more closely optimized with the architecture of the chip. In this paper, we present an extensible Python-based RTL generator that is closely linked to simulation and testing environments. This approach provides flexibility for use on different hardware platforms, such as tape-outs and FPGA implementations, and has promise in AI-assisted design workflows.

0.25

A Two-Element Capsule Antenna for Near-Field Polarization MIMO in Wireless Capsule Endoscopy

eess.SP ·2026-10-02 ·Pyry Kiviharju, Lauri Vähä-Savo, Clemens Icheln, Kenichi Takizawa, Katsuyuki Haneda
unusual similarity 0.51
Abstract · 12 pages, 21 figures. Submitted to IEEE Open Journal of Antennas and Propagation

Multiple-Input-Multiple-Output (MIMO) technology is considered to be a viable method for spectral efficiency and data rate enhancement in wireless communications. This article presents a two-element capsule antenna with orthogonal current distributions for polarization multiplexing in a wireless capsule endoscopy (WCE) application at 915 MHz. The proposed antenna was evaluated in a MIMO link where it served as the transmitter and an existing on-body antenna was the receiver. The performance was assessed in two distinct environments: an anatomically accurate human body model using full-wave (FW) simulations, and a homogeneous liquid tissue phantom, using both FW simulations and measurements. The former was used to evaluate the performance in a realistic environment and to demonstrate the superiority of the proposed capsule antenna against existing two-element antennas in the literature, while the latter aimed at verifying the antenna design by comparison of simulated and measured MIMO links. We studied channel capacity and eigenvalues for the comparisons. The MIMO link with the proposed antenna provided nearly doubled median channel capacity relative to a baseline single-input-single-output link, consistently in the simulations and measurements. Our results prove the suitability of the proposed antenna for polarization multiplexing and, in terms of channel capacity, establish it as the best conformal two-element capsule antenna design at 915 MHz.

0.31

Energy-Aware Receiver-initiated MAC Protocol for Energy Harvesting IoT

cs.NI cs.ETcs.PF ·2026-10-08 ·Sohail Sarang, Praveen Kumar Donta, Dejan Vukobratović
unusual similarity 0.48
Abstract · Submitted to 34th Telecommunications Forum (TELFOR 2026)

Energy harvesting (EH) technology has emerged as a key approach for extending the operational autonomy of Internet of Things (IoT) devices. In this context, medium access control (MAC) protocols for EH-IoT make use of the harvested energy efficiently to enhance the application performance. However, many existing MAC protocols rely on stored energy the battery in devising energy-aware strategies, which can interrupt the device operation and hinder the execution of ongoing tasks in dynamic and low EH conditions. To address this, this paper presents an energy-aware receiver-initiated MAC protocol for EH-IoT devices, called EARI-MAC, that adjusts the duty cycle of the receiver device based on stored energy and current harvesting power using the mathematical formulation. This approach supports sustained receiver operation under low EH conditions and improved application performance when harvested energy is abundant. The performance of the EARI-MAC has been evaluated in simulation using the real solar data gathered in Novi Sad, for three consecutive days. The simulation results demonstrate that the EARI-MAC utilizes the available energy resources efficiently and improves the packet delivery ratio and network throughput by more than 10%, reduces the receiver energy consumption by 5.6% and 8.2% and energy consumption per bit by 9.6% and 13.9% compared with QPPD-MAC and energy-unaware MAC, respectively.

0.27

Fundamentals of Energy-Efficient Hardware Configurations for Wireless Links with Sleep Modes

cs.IT ·2026-09-10 ·Anders Enqvist, Özlem Tuğfe Demir, Cicek Cavdar, Emil Björnson
published similarity 0.48
Abstract · 13 pages, 8 figures. A preliminary version was presented at IEEE VTC2024-Spring

In this paper, we examine the energy efficiency (EE) of a base station (BS) with multiple antennas. We use a state-of-the-art power consumption (PC) model that captures the passive and active parts of the transceiver circuitry, including the effects of radiated power, signal processing, and passive consumption. The paper treats the transmit power, bandwidth, and number of antennas as the optimization variables. We provide novel closed-form solutions for the optimal ratios of power per unit bandwidth and power per transmit antenna, and discover a new relationship in which the radiated power equals the total transceiver power at the EE-optimal operating point. A central finding is that the EE-optimal signal-to-noise ratio (SNR) collapses to a universal numerical constant of approximately 5.93 dB, independent of channel and hardware parameters. We present an algorithm that jointly optimizes the three design variables to achieve maximum EE under practical constraints, and provide analytical insight into whether maximum power or maximum bandwidth is optimal and how many antennas a BS should utilize. We further extend the optimization framework to incorporate quality-of-service (QoS) requirements and three advanced sleep modes of varying depth: absolute sleep, deep sleep, and idle mode. We characterize the optimal hardware configuration for each mode and determine when the rush-to-sleep strategy, which transmits briefly at the EE-optimal active configuration and sleeps the rest of the time, is optimal. Incorporating wake-up transition delays, we reveal how latency constraints and sleep-mode-specific transition times jointly dictate the optimal sleep mode for data packets with absolute deadlines. Together, these results indicate that energy-efficient operation requires treating transmission and sleep as a single coupled optimization.

0.58

Age-Optimal Target Wake Time: Provably Good Wake Schedules for Energy-Constrained Wi-Fi Status Updating

cs.NI cs.IT ·2026-08-21 ·Haoyu Wang, Bo Sheng, Xiaoqian Zhang
publishedtheorycode/data similarity 0.48
Abstract · 11 pages, IEEE conference format; extended version (full proofs in the appendix) of a paper accepted at MSWiM 2026, Paris. This version adds…

Target Wake Time (TWT), introduced in IEEE 802.11ax, lets an access point schedule exactly when each station wakes, transmits, and dozes. Existing TWT schedulers optimize energy or throughput, treating information freshness at best as a constraint and offering no performance guarantees. We design the wake schedule itself for freshness: minimize the weighted average Age of Information (AoI) over stations subject to per-station energy budgets, where the decision variables are the TWT triples (wake interval, offset, service period duration). We derive a renewal-exact AoI model for TWT under per-SP block fading and validate it against packet-level 802.11ax simulation with ~1% mean error. We show that, unlike preemptive scheduling, non-preemptive TWT packing can be infeasible at schedule density 1, and identify the granularity condition under which a small-first best-fit packer provably succeeds. Around this we build Harmonic-Greedy, a scheduler combining a convex relaxation, anchor-optimized power-of-two rounding, and a best-of-uniform safeguard, and prove it is a constant-factor approximation: 4/ln 2 ~= 5.77 under a mild granularity assumption and 6/ln 2 ~= 8.66 unconditionally. We implement the complete system in ns-3 -- a TWT wake/doze mechanism integrated with the power-save architecture, plus the scheduler -- and show that it is the only scheduler that stays near a relaxation lower bound across all regimes: against a strong energy-greedy baseline it ties when per-station energy floors already pin the periods, and wins by 4-36% exactly where the schedule density is binding and must be redistributed by AoI weight or channel quality rather than by energy budget -- the regime our analysis identifies.

0.56

CapsuleMotion: A Lightweight Real-Time Visual Motion Predictor for Capsule Endoscopy

cs.CV ·2026-09-14 ·Oliver Bause, Julia Werner, Oliver Bringmann
published similarity 0.47
Abstract · 4 pages, 3 figures, 2 tables, accepted at the 22nd Annual International Conference on Body Sensor Networks (BSN2026)

Video Capsule Endoscopy (VCE) is a non-invasive medical examination that allows for the observation of the small intestine, which is otherwise difficult to access. A fundamental challenge persists in the form of their limited size in order to still be swallowable. The resulting restricted battery capacity, however, contradicts with the power-intensive nature of image capture and transmission. Therefore, we propose CapsuleMotion, a patient-specific dynamic capsule behavior that utilizes the available energy in a goal-oriented manner to increase the likelihood of a complete screening of the gastrointestinal tract. By investigating and combining metrics from the on-device image compression, CapsuleMotion predicts the motion between two successive frames. The camera's frame rate will be modified in accordance with the predicted magnitude of motion. Furthermore, prior to entering the small intestine, the capsule operates in a low power mode with a significantly reduced frame rate. In this mode, the LocalizationNet is employed to determine the current organ, provided that motion was predicted. The proposed framework is evaluated on the Rhode Island VCE dataset and deployed on an ultra-low power single-core RISC-V demonstrator with an integrated hardware accelerator. CapsuleMotion demonstrated the capability to reduce electric energy consumption by up to 20.66% in comparison with conventional capsules that lack a dynamic frame rate. Additionally, the accuracy of detecting the entry point of the small intestine has been improved.

0.41

Scaling 5G-TSN Bridges: Operating Regimes, Scheduling, and Time Synchronisation Under Heterogeneous Industrial Traffic

cs.NI ·2026-08-14 ·Mohamed Seliem, Utz Roedig, Cormac Sreenan, Dirk Pesch
published similarity 0.47
Abstract · This version is the preperint of an accepted paper at MSWiM'26, the final version will appear in the conference proceedings

3GPP Release 16 enables a 5G system to operate as a transparent IEEE 802.1 TSN bridge, but its scalability under heterogeneous industrial workloads remains insufficiently characterised. This paper uses the nascTime framework on OMNeT++/Simu5G to evaluate how many TSN endpoints a single 5G NR cell can bridge before per-flow QoS degrades. We model closed-loop control, machine vision, bulk telemetry, and IEEE 802.1AS traffic over a four-bearer SDAP architec- ture, varying the number of endpoints from 1 to 40, MAC scheduler, radio bandwidth (10 MHz and 20 MHz), and channel model. Results show three operating regimes. Below saturation, non-DRR schedulers perform similarly; near saturation, QoS- aware PF reduces critical-flow P99 latency by up to two or- ders of magnitude relative to channel-aware and fairness-based schedulers; and under overload, only QoS-PF maintains near- complete delivery for the highest-priority traffic. Across the two evaluated bandwidths, the saturation threshold approximately doubles when bandwidth doubles. We also show that isolating IEEE 802.1AS/gPTP traffic on a dedicated high-priority radio bearer reduces clock-servo instability, although endpoints carry- ing lower-priority data still experience elevated synchronisation delay under saturation because of reduced MAC scheduling frequency. Finally, the evaluated sub-6 GHz, 30 kHz-SCS con- figuration exhibits an effective latency floor of approximately 2.25 ms, indicating that sub-3 ms TSN deadlines may require radio-configuration changes such as configured grants or higher numerology

0.27