CS Paper Radar

MetamorphX: An Ungrounded 3-DoF Moment Display that Changes its Physical Properties through Rotational Impedance Control

Takeru Hashimoto, Shigeo Yoshida, Takuji Narumi

cs.HC ·submitted 2026-11-02 12:18 UTC · v1
top venuehighly cited

Abstract

Humans can estimate the properties of wielded objects (e.g., inertia and viscosity) using the force applied to the hand. We focused on this mechanism and aimed to represent the properties of wielded objects by dynamically changing the force applied to the hand. We propose MetamorphX, which uses control moment gyroscopes (CMGs) to generate ungrounded, 3-degrees of freedom moment feedback. The high-response moments obtained from CMGs allow the inertia and viscosity of motion to be set to the desired values via impedance control. A technical evaluation indicated that our device can generate a moment with a 60-ms delay. The inertia and viscosity of motion were varied by $0.01\,\mathrm{kg\,m^2}$ and $0.1\,\mathrm{N\,s}$, respectively. Additionally, we demonstrated that our device can dynamically change the inertia and viscosity of motion through virtual reality applications.

Comment
14 pages, 15 main-text figures and 8 appendix figures. Author-prepared version of the paper published at UIST 2022
Journal ref
Proceedings of the 35th Annual ACM Symposium on User Interface Software and Technology (UIST '22), Article 72, 1-14 (2022)
DOI
10.1145/3526113.3545650

Closest papers

Nearest neighbours by meaning across the whole index.

Selfrionette: A Fingertip Force-Input Controller for Continuous Full-Body Avatar Manipulation and Diverse Haptic Interactions

cs.HC ·2026-11-02 ·Takeru Hashimoto, Yutaro Hirao
top venuehighly cited similarity 0.55
Abstract · 14 pages, 12 figures. Author-prepared version of the UIST 2024 paper. Both authors contributed equally

We propose Selfrionette, a controller that uses fingertip force input to drive avatar movements in virtual reality (VR). This system enables users to interact with virtual objects and walk in VR using only fingertip force, overcoming physical and spatial constraints. Additionally, by fixing users' fingers, it provides users with counterforces equivalent to the applied force, allowing for diverse and wide dynamic range haptic feedback by adjusting the relationship between force input and virtual movement. To evaluate the effectiveness of the proposed method, this paper focuses on hand interaction as a first step. In User Study 1, we measured usability and embodiment during reaching tasks under Selfrionette, body tracking, and finger tracking conditions. In User Study 2, we investigated whether users could perceive haptic properties such as weight, friction, and compliance under the same conditions as User Study 1. Selfrionette was found to be comparable to body tracking in realism of haptic interaction, enabling embodied avatar experiences even in limited spatial conditions.

0.61

Comparing Haptic Feedback Across Hand Tracking and Controllers in VR Object Interaction Tasks

cs.HC ·2026-09-18 ·Natalia Ocampo, J. Felipe Gonzalez, Robert J. Teather, Kiyoshi Kiyokawa
published similarity 0.52
Abstract

Hand tracking offers natural VR interaction but lacks controllers' inherent tactile feedback, while haptic feedback across input methods remains understudied. We conducted a participant study comparing vibration, impulse, and no feedback in hand- and controller-based VR interaction across grasp-, pinch-, and tap-like gestures assessing performance, workload, and preference. A custom glove and controller-mounted device provided both feedback types, aiming for consistency across input modalities. Controllers were faster for grasp and pinch, whereas hand tracking was more accurate for pinch and preferred overall. Haptics had limited performance effects, although impulse reduced grasp accuracy with controllers. Participants preferred vibration and impulse over no haptic feedback, favouring vibration overall. Our findings reveal a more nuanced relationship between haptic feedback, input device, and interaction context than suggested by previous work.

0.36

TapID: Rapid touch interaction in virtual reality using wearable sensing

cs.HC eess.SP ·2026-10-19 ·Manuel Meier, Paul Streli, Andreas Fender, Christian Holz
top venuepositionhighly cited similarity 0.52
Abstract · accepted to IEEE VR 2021

Current Virtual Reality systems typically use cameras to capture user input from controllers or free-hand mid-air interaction. In this paper, we argue that this is a key impediment to productivity scenarios in VR, which require continued interaction over prolonged periods of time---a requirement that controller or free-hand input in mid-air does not satisfy. To address this challenge, we bring rapid touch interaction on surfaces to Virtual Reality---the input modality that users have grown used to on phones and tablets for continued use. We present TapID, a wrist-based inertial sensing system that complements headset-tracked hand poses to trigger input in VR. TapID embeds a pair of inertial sensors in a flexible strap, one at either side of the wrist; from the combination of registered signals, TapID reliably detects surface touch events and, more importantly, identifies the finger used for touch. We evaluated TapID in a series of userstudies on event-detection accuracy (F1 = 0.997) and hand-agnostic finger-identification accuracy (within-user: F1 = 0.93; across users: F1 = 0.91 after 10 refinement taps and F1 = 0.87 without refinement) in a seated table scenario. We conclude with a series of applications that complement hand tracking with touch input and that are uniquely enabled by TapID, including UI control, rapid keyboard typing and piano playing, as well as surface gestures.

0.63

Altered Visual Hand Feedback in Virtual Reality: An Exploratory Study in Essential Tremor

cs.HC cs.GR ·2026-10-30 ·Alejandro Pascual-Valdunciel, Marcos Sacristán-Moraleda, Verónica Giménez de Béjar, Julián Benito-León, Juan Marín-Lahoz +2 more
similarity 0.52
Abstract · 12 pages, 5 figures, 3 tables. Under revision

Pathological tremor is the most prevalent movement disorder worldwide, characterized by involuntary muscular oscillations within a frequency of 3 to 12 Hz. Despite extensive research, the underlying mechanisms that generate and modulate tremor are not yet understood, and treatments are usually insufficient. While it is known that visual feedback is an important afferent pathway, little is known about the impact of altering the hand's visual representation on tremor expression. With the development of immersive technologies, VR poses an excellent tool to study how alterations to the representation of the hands affect tremor. In this work, we study this through two complementary experiments. In the first one, we show that a consumer-level hand-tracking system substantially attenuates tremor-band movements without preventing successful task completion. In the second one, with eight patients with essential tremor, we observe task-dependent differences in physical tremor between VR and the real world, with several patients exhibiting lower tremor-band activity in both hand kinematics and muscle oscillations, particularly during reaching tasks. Our findings represent an initial step toward validating the use of VR as an experimental tool for the research and treatment of pathological tremor, while highlighting strong user- and task-dependent effects.

0.19

Proprioceptive Finger Force Estimation for Reliable Box Manipulation

cs.RO ·2026-10-28 ·Junha Cha, Chanwoo Kim, Kisang Park, Yeoncheol Jang, Doyoung Kim +3 more
code/data similarity 0.52
Abstract · Project page: https://finger-force-estimation.pages.dev/

Reliable box manipulation requires successful placement without damage, which depends on maintaining sufficient contact force without excessive loading. We hypothesize that per-finger force feedback improves manipulation reliability relative to open-loop finger commands. To this end, we present Finger External-Force Estimation from Proprioceptive SignaLs (FEEL), an uncertainty-aware residual method that estimates per-finger external force magnitude from proprioceptive histories. Our method combines a calibrated virtual-spring estimate with a residual distribution predicted by a Mixture Density Network (MDN) and requires no dedicated contact sensors during deployment. The estimated force is used for continuous per-finger adaptation, while predictive uncertainty is evaluated as an empirical signal of ambiguity in proprioceptive force estimation. Across ten fingers and contact forces spanning 0-20 N, our method achieves a mean RMSE of 0.251 N, reducing the error by 92.8% relative to the virtual spring and by 9.4% relative to an end-to-end MDN. In box pick-and-place, force adaptation maintains task success at 10/10 and increases both damage-free outcomes and reliability from 7/10 to 10/10. The project page is available at https://finger-force-estimation.pages.dev/

0.35

A Transparent 3-DoF Assistive Device for Upper-Limb Tremor and Ataxia Compensation: Design and Experimental Validation

cs.RO ·2026-10-22 ·Thomas Dobosz, Veronika Hofmann, Ahmed Barhoma, Ann-Kathrin Henke, Johannes A. Gaus +10 more
similarity 0.52
Abstract · 8 pages, 7 figures, 3 tables, Preprint

Assistive devices for patients with neurodegenerative movement disorders must combine high mechanical transparency with the ability to generate corrective interaction forces. Achieving both properties simultaneously remains challenging. This paper presents the completed iAssistADL platform, a 3-DoF assistive device for future tremor and ataxia compensation during activities of daily living. The system employs a transparency-oriented mechanical architecture with all actuators located at the base, resulting in low moving mass, decoupled kinematics, and high mechanical transparency. To compensate for friction-induced transparency limitations along the vertical axis, a hybrid control strategy is proposed that combines open-loop force rendering in the horizontal plane with closed-loop force control in the vertical direction. The platform is experimentally evaluated through transparency measurements and static and dynamic force-rendering experiments at representative configurations. Results demonstrate resistive torques below 0.1 Nm in the horizontal plane, end-effector forces of up to approximately 10 N throughout the workspace, and accurate horizontal force rendering up to 4 Hz. While the vertical axis remains limited by friction-induced dynamics at higher frequencies, the proposed system successfully combines high transparency with controlled force generation, establishing a promising hardware platform for future tremor and ataxia compensation.

0.27

Ultra-Low-Impedance Robotic Gripper for High-Bandwidth and Transparent Physical Interaction

cs.RO ·2026-08-10 ·Joon Lee, Ari Choi, Seokhwan Jeong
published similarity 0.52
Abstract · ICRA 2026 (Late Breaking Result Poster)

Conventional robotic grippers often use high-ratio transmissions to generate grasping torque and external force sensors to measure physical interaction. High-ratio transmissions increase friction, reflected inertia, and mechanical impedance, while external sensors add hardware complexity. To address these trade-offs, this study proposes a novel 9-DOF, three-fingered Differential Direct-Drive (DDD) gripper that combines DD motors with a low-ratio (1:2) differential transmission. The mechanism centralizes actuator mass at the base to minimize moving-link inertia, while the differential architecture couples two motors in parallel to amplify torque during flexion. Experiments show that the prototype delivers a nominal grasping force of approximately 18 N and a fingertip force of 4.7 N, while maintaining a low motor contribution to system inertia (0.236%) and low passive mechanical impedance, with a maximum measured value of 50.1 N/m when the motors are unpowered. The proposed hardware addresses the trade-offs among torque, physical transparency, and kinematic dexterity, providing a foundation for high-bandwidth interaction and sensorless proprioceptive force estimation.

0.19

TinyARM-X: A Series of Open-Source, Configurable, and Transparent Torque-Controlled Desktop-Scale Robotic Manipulators

cs.RO ·2026-11-18 ·Nicolas Kosanovic, Jean Chagas Vaz
similarity 0.51
Abstract · 9 pages, 5 figures. Submitted to a robotics Journal. Reviews have not come in yet

Visuomotor policies have demonstrated that imprecise low-cost robots can autonomously complete complex manipulation tasks. However, most inexpensive manipulators rely on compact and rigidly position-controlled servos for actuation, which complicate simulation, operation, and safety. This work introduces TinyARM-X, a framework for easily manufacturable, configurable, and torque-controllable low-cost (<350 USD) serial manipulators. By using a single hardware/software architecture, a <7 Degree of Freedom (DoF) TinyARM can be manually reconfigured to an operational >3 DoF robot within 10 min. Actuator modeling and dynamic compensation enable torque-controlled applications like mixed-reality impedance control teleoperation and simulator force feedback rendering. Experiments include mechanical benchmarking and real-world force-aware telemanipulation. The TinyARM-7 has a payload of 33.5 g, a max speed of 0.77 m/s, and a reach of 210 mm. Moreover, with dynamic compensation, the robot has a backdrive-breakaway force of 1.4 N and a backdrive-running force of 0.7 N. Additionally, Cartesian-Impedance Control (CIC) attains a translational stiffness of >15 N/m. Lastly, the TinyARM-X stack is open-sourced to disseminate accessible desktop-scale torque-controlled robotic manipulation to the community.

0.21