CS Paper Radar

uhd-rfsoc: Bringing Off-the-Shelf RFSoC Boards to Unmodified UHD Applications

Wei Cheng, Yiming Li, Junyao Zheng, Cheng-Bin Chen, Tingjun Chen

cs.NI cs.AReess.SP ·submitted 2026-11-13 04:12 UTC · v1
code/data

Abstract

Next-generation wireless research relies on software-defined radios (SDRs) with more channels and larger bandwidth. The USRP family is one of the most widely used SDR platforms, and much of the wireless software ecosystem is built on top of the USRP hardware driver (UHD). However, each USRP model comes with a fixed channel count, bandwidth, and streaming capability. Off-the-shelf radio frequency system-on-chip (RFSoC) boards, on the other hand, integrate up to 16 analog-to-digital converters (ADCs) and 16 digital-to-analog converters (DACs) operating at several gigasamples per second (GS/s), but existing UHD applications cannot directly use them. We present uhd-rfsoc, an open-source FPGA design and host software stack that turns these boards, including the 16-channel ZCU216 and the RFSoC 4x2, into standard UHD devices without modifying UHD. Through standard UHD calls, applications can configure the carrier frequency, channel count, the per-channel I/Q sample rate, and the wire format. uhd-rfsoc combines timestamped, flow-controlled sample transport in the FPGA with data plane development kit (DPDK) packet processing and vectorized sample conversion on x86 and Arm hosts. The built bitstreams for a number of RFSoC board configurations with varying RF data converter rates, channel counts, I/Q sample rates, and wire formats all successfully pass UHD's built-in streaming benchmarks. We further demonstrate compatibility with unmodified GNU Radio flowgraphs, a custom GPU-accelerated transceiver digital signal processing pipeline, as well as the OCUDU and Duranta 5G radio access network stacks using both software and commodity user equipment.

Closest papers

Nearest neighbours by meaning across the whole index.

xCHEM: SDR-Based Multi-Link Channel Emulator for Real-Time Hardware-in-the-Loop Digital-Twin

eess.SP ·2026-10-28 ·Ali Saeizadeh, Gabriele Gemmi, Tamerlan Aghayev, Michele Polese, Pedram Johari +1 more
similarity 0.58
Abstract · 13 pages, 16 figures, 4 tables

This paper presents xCHEM, a radio-frequency channel emulator that inserts programmable channels between physical radios using a single NI USRP X4xx software-defined radio. External channel models stream impulse responses to its field-programmable gate array without firmware changes or interruption of signal processing. A streaming datapath implements six independently configurable directional channels across four radio interfaces. Each channel uses a sparse finite impulse response filter whose memory-backed delays decouple delay span from multiplier resources. The real and complex variants support 32 and 16 nonzero taps, respectively, with a maximum delay of 16666.62 ns and 4.069 ns resolution. Coefficient scaling and arithmetic right shifts control attenuation. Hardware measurements show root-mean-square errors of 9.5 ps in delay over the full span and 0.11 dB in attenuation. Multipath delays are recovered within one sample. An FPGA coefficient engine produces tested Doppler shifts from +/-1 Hz to +/-1 MHz with mean frequency errors below 0.032 Hz relative to quantized commands after carrier-offset calibration; at 200 Hz, it reduces the measured near-carrier spur by 53.3 dB compared with 1 kHz host updates.

0.39

A high-isolation wideband channelizer for MKID readouts: a custom HLS implementation on RFSoC

eess.SP astro-ph.IM ·2026-08-25 ·Alberto Hernandez Fernandez, David Diaz Martin, Jose Javier Diaz Garcia, Roger John Hoyland, Luis Fernando Rodriguez Ramos +2 more
benchmark similarity 0.57
Abstract · 18 pages, 7 figures. Submitted to the Journal of Astronomical Telescopes, Instruments, and Systems (JATIS). Extended version of Proc. SPIE 1…

We present a high-performance channelizer for Microwave Kinetic Inductance Detectors (MKIDs), designed to mitigate spectral leakage and scalloping loss through a 50% overlapping polyphase filter bank (PFB). The design is implemented on a Xilinx Zynq UltraScale+ RFSoC ZCU111 using a custom design - primarily in Vitis High-Level Synthesis (HLS), with the time-critical output serializer and glue logic in VHDL - that processes a 4.096 GSPS input stream with a per-branch super-sample rate (SSR) of 16. Rather than relying on aggressive 512 MHz clocking and vendor IP cores, our split-path architecture computes the delayed and non-delayed polyphase branches concurrently, so that the bulk of the channelizer operates at a robust 256 MHz while a single 512 MHz subdomain is confined to the BRAM-to-FFT section. This architectural parallelism enables a deep 16-tap prototype filter that doubles the filter depth of comparable high-speed systems and substantially improves channel isolation. We report the complete internal architecture of the reordering engine that implements the overlap, including two implementation hazards not documented in prior art: a pipeline-stage skew affecting state toggles in HLS, and the state-preservation requirements of a restartable design. The 2/1 overlapped channel response is validated in simulation - recovering the ~3.9 dB scalloping loss of a critically sampled channelizer to below 0.1 dB across the full 2 MHz channel - and characterized systematically with a 100-tone batch frequency sweep, while the parent readout system has been operated cryogenically with an MKID array in an adiabatic demagnetization refrigerator (ADR), identifying individual resonators in total darkness. The result is a resource-efficient, high-isolation benchmark for wideband frequency-division-multiplexed readouts.

0.38

Compute Before You Digitize: ADC-less Mixed-Signal Processing for Scalable Cryogenic Qubit Readout

cs.AR quant-phcs.ETeess.SP ·2026-11-17 ·Qirui Zhang, Ben Toby, He Wang, Benjamin Lienhard, David Blaauw +1 more
similarity 0.56
Abstract

We introduce DIRAC, an ADC-less in-cryostat qubit readout architecture that uses analog computing to redraw the analog-digital boundary. Directly operating on the front-end's analog output, passive complex mixers perform the equivalent of digital demodulation, ping-pong active-RC integrators average their outputs into down-sampled per-qubit traces, and a time-domain stage digitizes them, eliminating Nyquist-rate ADCs. A TX-RX co-design derives the mixers' local oscillators from the readout transmitter's baseband rather than per-tone PLLs. A per-line calibration flow trains the matched filter jointly with the neural network, improving fidelity and enabling low-bit-width, low-voltage digital processing. Designed in 22 nm FD-SOI and evaluated at 4 K on 1.12M experimental shots, DIRAC matches the fidelity of a floating-point (FP32) digital pipeline for readout windows down to 750 ns, at 31.6$\times$ and 238$\times$ lower energy than the fixed-point (FxP) and FP32 pipelines. It cuts the total 4 K power per physical qubit by 50.4% and 68.6% relative to FxP and room-temperature flex cables, respectively. At a fixed logical-qubit count and 4 K budget, this yields, against FxP, a code distance larger by 2 to 6 and a 1.6-7.3$\times$ (Willow) and 4.9-204$\times$ (SI1000, $p = 10^{-3}$) lower logical error rate.

0.22

A Hybrid Digital/Analog Polyphase Filtering Approach for High-Speed RF-DACs

eess.SP ·2026-11-06 ·Behdad Jamadi, Jungmin Lee, Tarun Cousik, Rohit Rangaraj, Jeffrey S. Walling
similarity 0.53
Abstract · 11 pages, 5 figures, 5 tables

This paper proposes a hybrid polyphase interpolation for RF-DACs that removes the need for full-rate digital commutation by using passive combining on the RF-DAC itself. A P-branch polyphase FIR filter is factored into M streams, each formed by a (P/M)-way digital commutator at fRF/M and driving a dedicated RF-DAC slice, giving either partial digital (1<M<P) or fully analog (M=P) recombination. We show that the slice array acts as a single full-rate DAC with an M-times longer zero-order hold, derive yield laws for slice gain, timing and unit-capacitor mismatch, and find that with retiming the binding requirement is sub-picosecond matching of the fRF clock arrival, so the best choice is the smallest M that closes digital timing. Two 28-nm digital macros, designed for a 12.8GSps output rate and verified by post-layout simulation, illustrate a 4-phase variant that closes timing up to 14.4GSps with its digital logic at fRF/4 and an 8-phase variant that closes timing up to 16GSps with its digital logic at fRF/8. The analog recombination is evaluated with a behavioral model of the slice array. The architectures target wideband software defined radio (SDR) platforms, including cognitive radio, electronic warfare, and satellite communications.

0.30

An FPGA-in-the-Loop Testbed for MU-MIMO OFDM Beamforming over Ray-Traced Wireless Channels

cs.NI ·2026-09-06 ·Drew Schlesener, Tolunay Seyfi, Fatemeh Afghah
similarity 0.53
Abstract

Wireless networks face ever expanding throughput demands from heterogeneous, high-density user populations, requiring beamforming algorithms that adapt to channel conditions with low latency. Validating such algorithms requires either costly over-the-air testbeds or simulation environments that lack the timing and resource constraints of real hardware, leaving a gap between algorithm design and hardware-realizable deployment. This work presents a frame-based hardware-in-the-loop (HIL) testbed that closes that gap by coupling an FPGA-based implementation of OFDM Waveforms with MU-MIMO beamforming to NVIDIA Sionna's ray-tracing channel simulator, enabling a physical base-station architecture to transmit and receive against a Sionna-rendered digital-twin propagation environment. Unlike prior work that validates beamforming algorithms either purely in simulation or on full RF testbeds, this architecture allows beamforming logic running on actual FPGA fabric to be evaluated under realistic, controllable, and repeatable channel conditions, including UE mobility and site-specific multi-path, without requiring an anechoic chamber or live RF front end. We detail the FPGA OFDM transmit/receive pipeline, the synchronization and data interface between the FPGA and the Sionna environment, and validation of signal quality under AWGN and ray-traced channel conditions, establishing this testbed as a platform for hardware-validated beamforming research.

0.26

Python-based RTL Generator Demonstrated on a Low-IF 2-FSK Wireless Communication System

eess.SY ·2026-08-17 ·Brandon P. Hippe, David C. Burnett
similarity 0.52
Abstract

Hardware optimization is critical in the design of efficient wireless communication systems. Wireless communication hardware often consumes a significant fraction of the total system's power budget, with much of this power used in circuits that reduce various types of noise, particularly in the analog front end. The Single-Chip Micro Mote, or SCuM, uses a crystal-free radio architecture and makes design trade-offs that favor power consumption over noise performance while maintaining standards compatibility with popular Internet-of-Things (IoT) protocols such as IEEE 802.15.4 and Bluetooth Low Energy. In the continued development of SCuM, we recognize that the digital baseband hardware developed can be more closely optimized with the architecture of the chip. In this paper, we present an extensible Python-based RTL generator that is closely linked to simulation and testing environments. This approach provides flexibility for use on different hardware platforms, such as tape-outs and FPGA implementations, and has promise in AI-assisted design workflows.

0.25

Wideband Hybrid Beamforming via Programmable Unitary Mixer--TTD RF Networks

eess.SP ·2026-11-15 ·Nikola Zlatanov, Damir Salakhov, Zhen Gao
published similarity 0.52
Abstract · Accepted

This paper proposes a wideband hybrid beamforming architecture whose analog front-end consists of fixed unitary mixers interlaced with programmable diagonal phase-shift/true-time-delay (TTD) layers. Under ideal passive-component assumptions, the analog beamformer is semi-unitary on every OFDM subcarrier, so the injected RF-chain power reaches the antenna ports without analog-network loss. We design the phase shifts and delays of the programmable diagonal phase-shift/TTD layers for OFDM sum-rate maximization. Numerical results show that increasing mixer--TTD depth improves the sum rate under ideal component assumptions and a common injected RF-power budget. With component losses included, a shallow design retains an advantage over the evaluated hybrid baselines at low-to-moderate powers, motivating deeper implementations with low accumulated loss.

0.33

FIREQ: FPGA Instrumentation for Readout and Qubit control

eess.SY quant-ph ·2026-08-29 ·Giuseppe La Capra, Fabio Calabrese, Giorgio D'Amico, Christian Conti, Andrea De Simone +6 more
code/data similarity 0.51
Abstract · 15 pages, 9 figures

We present FIREQ (FPGA Instrumentation for Readout and Qubit control), an open-source RFSoC-based framework for the control and readout of superconducting qubits. FIREQ combines a modular AXI-compliant firmware architecture with a PYNQ-based software stack designed to support extensible hardware integration, deterministic experiment timing, and low-overhead execution of repeated calibration and characterization workflows. The firmware implements direct RF synthesis and acquisition, trigger-based sequencing, programmable pulse generation, frequency-multiplexed readout, and memory-efficient acquisition and waveform buffering. The software adopts a client-server architecture with streamed data transfer and dependency-aware configuration updates to reduce host-device and reconfiguration overhead during parameter sweeps. On an AMD Zynq UltraScale+ RFSoC ZCU216, FIREQ generates RF pulses up to 9.3 GHz with a pulse-duration resolution of 107 ps and an event-timing resolution of 1.7 ns. FPGA resource utilization is compared with representative open-source RFSoC control frameworks, showing a low BRAM footprint while retaining full-rate I/Q generation and acquisition. The RF output is characterized in terms of phase noise, noise spectral density, and inter-channel timing skew. End-to-end operation is validated on a superconducting qubit through resonator spectroscopy, Rabi, Ramsey, and relaxation measurements, yielding T1 = 6.94 us and T2* = 13.50 us. FIREQ can therefore be used both as a qubit-control platform and as an experimental environment for evaluating alternative control and readout IP architectures.

0.35